Project: MRS3: Plug & Play music system: "The smallest"

Modérateur: equipe_des_modos

Project: MRS3: Plug & Play music system: "The smallest"

Messagepar arno samimi » 05 Mai 2016, 18:49

I represent and obstruct Car Hifi components from Audio Art (http://www.audioart.ch).
Audio Art sells and used not only chosen Car Audio products, but also produces its own components under the name Scustic.

In my MRS3 it comes to use the smallest music system:

The Plug & Play solution from Audiotechnik Fischer consisting of:
-Amplifier PP82DSP
-Bass reflex subwoofer PP 7S D
-Scustic 2-way system consisting of the Helix 13cm woofers P 205 (also from Audiotechnik Fischer) and tweeter and crossover from Scustic
The subwoofer has been changed a bit and the bass were exchanged against two 16cm Kicker Comp RT 67 Chassis.

In addition still insulation mats for the front door panels and for the spare wheel box.
All cables and speaker cables remain OEM.
The only line which must be laid is the connection to the rear to the subwoofer.

And you've got a "small and simple" solution, which makes difficult the life of the next larger music systems.

Moreover, I have made a few changes for me, which have nothing to do with the performance of the music system.

Here we go:

The components:

Image

Exchanged the bass and changed the embroidery of orange / white to yellow / black:

Image

A bit disassemble:

Image

Image

OEM speaker out, sealing tape and adapter rings mounted, and the OEM speaker cable in the OEM harness laid from the front to the behind of the door panel:

Image

Image

Image

The midrange speaker, also with sealing tape, mounted:

Image

Image

Image

Image

Door panels insulated on the inside:

Image

And mounted, nothing to see from the outside:

Image

The Scustic tweeters and crossovers already prepared:

Image

They fit in without modification. The OEM cover fits:

Image

Image

The crossovers find space each side of the dashboard easily accessible:

Image

Image

I have made a aluminium holder. Thus, the amplifier can be simply screwed upper the glovebox on the dashboard holder:

Image

Image

Image

The Y adapter is now plugged. For this, the OEM radio needs to be expanded, plug in and over to the amplifier:

Image

Image

Image

The cable between the amplifier and subwoofer mounted. And the spare wheel box also insulated:

Image

Image

Image

Image

As already mentioned, I have changed the bass chassis for more pressure. Therefore, the amplifier needs an additional power supply.
Otherwise, the OEM power supply from the Y Adapter is sufficient. Believe it or not, but it would be enough:

Image

Image

Image

Image

And mounting:

Image

Image

Image

Image

Image

Image

And a new battery, An Optima Yellow Top:

Image

Image

Image

Image

To adjust the music system with the software, and to do this without expanding the
glove compartment, I have mounted a USB Connection in the glove compartment:

Image

Image

Image

Image

Image

And a new iPod slot, so I don’t have to use the OEM USB Connector in the center console:

Image

Image

Image

Image

This iPod slot is from the Volkswagen cars. I have remove the VW electronic and mount a USB Adapter. So all stay Plug&Play:

Image

Image

Image

Fit in the center console:

Image

Image

Image

And ready installed:

Image

The iPod labeled and anodized the front plate matching to the MRS3:

Image

Image

The spare wheel box covered with felt:

Image

Now we come to the fixation of the spare wheel box - subwoofer.
I have made an aluminium holder:

Image

The threaded sleeve is pressed and stuck in the plastic threaded hole for mounting normally the spare wheel:

Image

Anodized:

Image

The threaded sleeve is pressed and stuck in:

Image

Screwed:

Image

The bracket is screwed from below:

Image

Now you can screw the threaded bolt:

Image

Plugged on the subwoofer:

Image

And screwed with a lock nut:

Image

The on-board tool also has space:

Image

Moreover i left still leave a residual thread to install a RSC coilover strut to show at meetings. Practical and simple:

Image

Image

In the end, even adjust with the Audiotechnik Fischer Software – finished:

Image

Image
Avatar de l’utilisateur
arno samimi
pilote espoir
pilote espoir
 
Messages: 449
Inscription: 20 Nov 2005, 20:24
Localisation: CH-4102 Binningen
Prénom: Arno

Retourner vers La Megane RS

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 1 invité

cron